INSTRUCTIONS \ TTSH

 

 

Welcome to the TTSH section. From here on we’ll deal with
how to completley construct a TTSH.

 

The old instructions for the TTSH V1 can be found here (PDF).

 

TTSH rev 3 errors

Rev 3 boards has 4 errors, check above PDF for correction.

 

TTSHv3Schematics

 

Here is the BOM for the main board and BOM for the 4027 oscillator. If you’ve bought a unit then you’ll find information on how to get these parts in your confirmation e-mail.
If you’ve bought a set of V2 boards and have all the components for the V1 version, Here’s the list of the components needed to complete the new build. The things that has changed are LED-drivers, amplifiers and the PSU.

 

BOM for REV 3 coming soon…

 

The building is divided into 13 easy parts. In general it’s
pretty straight forward when it comes to stuffing the boards.
Put everything where it’s supposed to be and you should be
fine. The general build order is first resistors, then capacitors,
finishing with semiconductors and integrated circuits.

 

Now on to the sections.

 

01) Preparations
02) 4027-1 sub modules
03) VCO 1 to 3
04) VCF
05) ADSR and ADR
06) VCA
07) PREAMP, RINGMODULATOR and ENVELOPE FOLLOWER
08) MIXER and REVERB
09) NOISE
10) VOLTAGE PROCESSORS
11) S&H, INTERNAL CLOCK and ANALOG SWITCH
12) AMPLIFIERS
13) Finishing up

 

There’s also three additional pages –

 

14) Trimming instructions
15) Modifications
16) Construction details

 

 

 


人間のコンパレータ ©2014 www.thehumancomparator.net